Timer Recording
Timer recording can be programmed
Preparation:
•Set the clock correctly (see pages E17 ~ E19).
•Press [VCR] to select the VCR mode. (The VCR indicator on the front panel will light.)
•Load a cassette tape with the erase prevention tab intact.
•Press the [DISPLAY] button to verify that the time and date are correct (see page E32).
Example: Program a timer recording for the 26th day, channel 125 (CATV), 11:00 – 11:30 PM on timer program number 1 (Tape speed: SLP).
1.Press [SETUP/MENU].
The “MENU” screen appears on the TV screen.
MENU |
|
|
TIMER REC SET | ON | OFF |
AUTO REPEAT | ||
SAP | ON | OFF |
CH SETUP |
|
|
SYSTEM SETUP |
|
|
SPEAKER SETUP |
|
|
TVGuardian SETUP
2. Select “TIMER REC SET”, then press [ENTER].
MENU |
|
|
TIMER REC SET | ON | OFF |
AUTO REPEAT | ||
SAP | ON | OFF |
CH SETUP |
|
|
SYSTEM SETUP |
|
|
SPEAKER SETUP |
|
|
TVGuardian SETUP
3.Press [4] or [5] to select one of the program line, then press [ENTER].
DATE START END CH
–
4. Press [4] or [5] to select the date, then press [ENTER].
DATE START END CH 26 WE 
5.Set the start time, end time, channel and tape speed as in step 4.
DATE START END CH
26 WE 11:00PM 11:30PM125SLP
Notes:
•Press [CLEAR/CANCEL] to move cursor backward for correction.
•To record from external source, set the channel to “L”. “L” will appear next to CH 125 (or 69).
VCR
DISPLAY 
TIMER REC 
CLEAR/
CANCEL
SETUP/
MENU
ENTER | 4,5 |
6.Repeat steps 3 ~ 5 for other programs.
•To return to the normal screen, press [SETUP/MENU] twice.
DATE START END CH
26 WE 11:00PM 11:30PM125SLP
7.Press [TIMER REC].
The clock symbol ( 
) will appear on the FL display and the VCR stands by for recording. At the same time, VCR mode will change to DVD mode automatically. You can use DVD even if the VCR is in the Timer recording mode.
If you do not use the DVD, turn the power off.
The timer recording will start at 5 seconds before the time you predetermined.
Notes:
•If the clock symbol ( 
) does not appear on the FL display in spite of the pressing of [TIMER REC], the cassette may not have been loaded yet (see page E27).
•If the cassette is ejected in spite of the pressing of [TIMER REC], the erase prevention tab of the cassette may have been removed (see page E27).
•If the clock symbol ( 
) blinks on the FL display when the timer recording ended, the TV program has not been completely recorded because of an insufficient tape supply. Press [TIMER REC] to cancel the timer program or press [q EJECT] to remove the cassette tape.
•During timer recording standby mode, the VCR mode cannot be selected. To use the VCR, press [TIMER REC] at first, then press [VCR] to change to VCR mode. After you use the VCR, press [TIMER REC] again to put the VCR into timer recording standby mode.
•If you press [TIMER REC] during timer recording, the recording operation will be interrupted. If you press [TIMER REC] again within the programmed time, the recording operation will start again.
•After a power failure or disconnection of the power plug, all programmed recording settings and time display will be lost upon resumption of power. In this case, reset the clock (see page E19) and reprogram any timer recordings.
2B80201A [E] | 34 | 24/2/03, 7:14 PM |
