Sanyo HF15000L Basic Operation Main Menu, qInput, wPC adjust, eImage select, rImage adjust

Basic Operation

Main Menu

For detailed functions of each menu, see “Menu Tree” on pages 83-85.

Main Menu Sub-Menu

q w e r t y u i

o

qInput

Used to select an input source (Input 1, Input 2, Input 3, or Input 4) (p.33-35).

wPC adjust

Used to adjust the parameters to match with the input signal format (pp.37-39).

eImage select

For computer source, used to select an image level among Dynamic, Standard, Real, and Image 1-10(p.40).

For Video source, used to select an image level among Dynamic, Standard, Cinema, and Image 1-10(p.48).

rImage adjust

For computer source, used to adjust the computer image. [Contrast/Brightness/Color management/Color temp./ White balance (R/G/B)/Offset(R/G/B)/Auto picture control/Advanced color/Sharpness/Gamma/Reset/Store] (pp.41-43).

For video or HDMI source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color management/ Color temp./White balance (R/G/B)/Offset (R/G/B)/Auto picture control/Advanced color/Sharpness/Gamma/ Noise Reduction/Progressive/Reset/Store] (pp.49-51).

tScreen

For computer source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/True/Custom/Custom adj./Digital zoom +/-/Keystone/Ceiling/Rear/Screen aspect/Reset] (pp.44-46).

For video or HDMI source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/Natural

wide/Custom/Custom adj./Keystone/Ceiling/Rear/Screen aspect/Reset] (pp. 52-53).

ySetting

Used to set the projector’s operating configurations (pp.54-69).

uInformation

Displays the input source information: Input, H-sync freq., V-sync freq., Screen, Lamp mode, Lamp control, Lamp interval, Lamp 1, Lamp 2, Lamp 3, Lamp 4, Language, Filter counter, Power management, Key lock, PIN code lock, Shutter management, Remote control, SERIAL NO. and Option control No. (p.30).

iNetwork

See the owner’s manual of “Network Set-up and Operation”.

oGuide

The key operation is displayed.

27