Input Selection
Computer Input Source Selection
| Menu Operation |
1 | Press the MENU button to display the |
| Menu. Use the Point ed buttons to select Input and |
| then press the Point 8 or the SELECT button. |
2 | Use the Point ed buttons to select the desired input |
| and then press the Point 8 button to access the |
| submenu items. |
3 | Use the Point ed buttons to select the desired |
| source and then press the SELECT button. |
✔Note:
•“Input 3” and/or “Input 4” are selectable only when interface board(s) are connected to either or both of the slots.
WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )
RGB(PC analog)
When your computer is connected to the INPUT 1 (ANALOG) terminal, select RGB (PC analog).
✔Note:
•Input source changes if the INPUT 1 button on the remote control is pressed.
WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )
When connecting the computer output [5 BNC Type (Green, Blue, Red, Horiz. Sync, and Vert. Sync.)] from the computer to G, B, R, H/HV, and V jacks:
RGB
When your computer is connected to the INPUT 2 (5 BNC INPUT JACKS) terminal, select RGB.
INPUT MENU
INPUT 2 MENU
34
