Computer Input
Keystone |
|
This function is used to adjust keystone distortion of the |
|
projected image. Use the Point ed buttons to choose the |
|
item you want to adjust. |
|
Standard |
|
Adjusts the Horizontal/Vertical keystone distortion of the |
|
projected image. |
|
Corner correction |
|
Adjusts the corner distortion of the projected image. |
|
Corner pattern |
|
Choose a Corner pattern mode among Red, White, Blue, |
|
and Off. |
|
Store |
|
Store...........Keeps the keystone correction even when the |
|
AC power cord is unplugged. |
|
Reset..........Releases the keystone correction when the AC |
|
power cord is unplugged. |
|
Press the KEYSTONE button on the remote control to switch |
|
the Standard (for Vertical/Horizontal) /Corner correction |
|
adjustment. The Standard or Corner correction adjustment | Ceiling |
dialog box appears. Use the Point ed7 8 buttons to correct | |
the Standard or Corner distortion. (p.32) |
|
Ceiling
When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a
Rear
When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.
Screen aspect
This function is used to scale the input source to fit the screen. Select one of the following aspect ratio which is suitable for your cable and computer. Select “Full” if you do not want to set aspect ratio.
Full........Flexible aspect ratio
16:9.......16:9 aspect ratio
16:10.....16:10 aspect ratio
4:3........4:3 aspect ratio
Reset
Rear
✔Note
•When the 16:9 function is selected, Wide(16:9) is not available in the PC and AV screen (pp.44, 52).
This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at Yes.
46
