Sanyo HF15000L owner manual Video Input, Video System Selection, AV System menu Video or S-video

Video Input

Video System Selection

1	Press the MENU button to display the On-Screen Menu.
	Use the Point ed buttons to select Input and then	AV System menu (Video or S-video)
	press the Point 8 or the SELECT button.
2	Use the Point ed buttons to select System and then
	press the Point 8 or the SELECT button.
3	Use the Point ed buttons to select the desired system
	and then press the SELECT button.

Video Jack or S-video Jack

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-Mor PAL-N, select the system manually.

PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

Y, Pb/Cb, Pr/Cr Jacks

AV System menu (Y, Pb/Cb, Pr/Cr)

Auto

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

When the Video System is 1035i, 1080i or 1080p, select the system manually.

Y, Pb/Cb, Pr/Cr SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, 1080i, and 1080p.

✔Note:

The AV System Menu cannot be selected when selecting RGB (Scart).

47