Network Camera Settings
In order to use the camera as a network camera, you must make the following settings in the order given.
When making network connection settings, the network settings must always be made first.
1
Installation of
Use the accessory setup
2
Computer and Camera Settings (p. 16)
Connect the computer and the camera directly, and access the camera using the computer’s web browser.
3
Network Connection Settings (p. 17)
More than one camera can be connected to the same network, but before the cameras can be connected, you need to make various settings for each camera such as assigning IP addresses. The following three types of network connections can be made. Set the cameras in accordance with the purpose of use.
A
NETWORK settings (p. 18)
These settings are for when the camera is being connected to a LAN. This is the normal type of connection to use for this camera.
B
WIRELESS LAN settings (p. 20)
These settings are used when connecting the camera to an access point for a wireless LAN.
C
PPP
These settings are used when using a modem to connect the camera to the Internet.
Note: If using a modem to make a
– 12 – | English |
