Name and Function of Each Part
| 4 |
3 | 5 |
|
1
6
3 7 2
|
|
| PC CARD | |
MONITOR | ETHERNET | |||
OUT | ||||
|
|
| ||
| COM | AC24V | GND | |
PC |
|
|
| |
POWER 1 2 |
|
|
| |
MODEM |
| DC12V |
| |
ALARM IN OUT | CLASS 2 WIRING | |||
1Lens mount cap
Attach this cap to protect the lens mounting section. When using the camera, remove the cap and attach the automatic
2Camera mounting bracket
This bracket can be installed to either the top or bottom of the camera as desired. When changing the position of the camera mounting bracket, you should always reuse the screws that have been removed.
Note: If using a camera mounting bracket (sold separately), select a location that is strong enough to bear the full weight of the camera and the mounting bracket for long periods, and install the camera and mounting bracket securely.
3Flange back locking screws (p. 8)
4Flange back adjustment dial (p. 8)
5PC CARD slot
Use this slot to insert a memory card or wireless LAN card.
Note: Make sure that the camera’s power is turned off before inserting the card.
6MONITOR OUT connector
When setting up the camera, use this connector to connect the camera to the VIDEO IN connector of a monitor for adjusting the angle of view and focus.
7POWER indicator
This indicator illuminates when 24 V AC or 12 V DC is being supplied to the power input terminals of the camera.
English | – 5 – |
