Fax being cut off, Reception ends, Sec, Hour | Sharp AR-FX9 specification

	Menu item		Settings (factory default setting appears in bold)	Page
	16 : RCV REDUCE	When a fax is received that is larger that the printing paper,
		enable reduction of the fax to the size of the paper to avoid the
		fax being cut off.		65
		1	: ON
		2	: OFF

	17 : BEEP LENGTH	Set the length of the beep that sounds when fax transmission or
		reception ends.
		1	: 3 SEC	18
		2	: 1 SEC
		3	: NO BEEP

	18 : RINGER VOLUME	Set the volume of the ringer.
		1	: OFF
		2	: LOW	17
		3	: MIDDLE
		4	: HIGH

	19 : BEEPER VOLUME	Set the volume of the beep that sounds when a key is pressed.
		1	: OFF
		2	: LOW	19
		3	: MIDDLE
		4	: HIGH

	20 : DIAL MODE	Set the dial mode for the type of line you are on.
		1	: TONE	31
		2	: PULSE

	21 : DISTINCTIVE RING	Set the ring pattern for distinctive ring.
		1	: OFF
		2	: STANDARD
		3	: PATTERN 1	41
		4	: PATTERN 2	41
		4	: PATTERN 2
		5	: PATTERN 3
		6	: PATTERN 4
		7	: PATTERN 5

	22 : INDEX PRINT	Enable printing of a black mark (index) at the top of each
		received fax page.		36
		1	: ON	36
		1	: ON
		2	: OFF

	23 : DATE&TIME FORMAT	1 : TIME FORMAT
			Select 12-hour or 24-hour format for the time set in the
			machine.	23
			1 : 12 HOUR
			2 : 24 HOUR

		2	: DATE FORMAT
			Set the format of the date in the display and in printouts.
			1 : MMDDYYYY	24
			2 : DDMMYYYY
			3 : YYYYMMDD

	24 : 2-SIDED RX	Print on both sides of the paper when a multi-page fax is received.
	(AR-168D only)	1 : ON		64
		2	: OFF

	25 : TRAY SELECTION	Set the tray for printing received faxes.
	(When the 250-sheet paper		1 : AUTO
	feed unit is installed.)		2 : TRAY 1	30
	("24: TRAY SELECTION"		3 : TRAY 2	30
	("24: TRAY SELECTION"		3 : TRAY 2
	when the AR-168S is
	used.)

8

Image 12

Sharp AR-FX9 Fax being cut off, Reception ends, Sec, Set the volume of the ringer, Hour, 24 2-SIDED RX, AR-168D only

Contents

AR-FX9 For users in the USA Use only the line cable that was provided with the machine Important safety information Introduction FCC Notice to users Sharp Electronics Corporation Table of Contents HOW to USE the FAX Function TWO-SIDED Reception AR-168D only...64 Selecting the transmission mode Quick Reference Guide Sending a fax Receiving a fax List of FAX Functions Error occurs to 15 minutes can be selected 00 15 min min Enable the polling security functionEnable the remote reception function Select the condition for printing reports on received faxes Set the volume of the ringer Set the dial mode for the type of line you are onFeed unit is installed Tray When the AR-168S is Used Junk FAX # Be blockedSet time is detected 00 10 Cannot receive messages or otherwise fails Selecting Settings for the Function Connecting the Telephone Line Cord ConnectionsOnline Manual on the CD-ROM Connecting Other Devices Final Preparations Part Names Following illustration shows the part names of the AR-168D Press this key to select the mode of reception Press this key to switch between upper and lower casePress this key to adjust the contrast before sending faxes Look AT the FAX Operation Panel Selected mode lights copy, printer, scanner ProceduresFax mode indicators This lights up when an original is placed in the SPF/RSPF Using the Arrow Keys Adjusting the Beep VolumeAbout the Liquid Crystal Display Pressed, the item is selected or entered Adjusting the Ringing Volume Press the key or key To set the ringer volumePress the Enter key Press the Menu key Selections are as follows Setting the Length of Alarm Beeps Length or to turn them offSelections are as follows 13SEC Adjusting the Alarm Beep Volume Press the key or key To set the alarm volume FAX Setup HOW to Enter Characters Entering Your Name and FAX Number Numeric keysPress the key or key to select 1SET and press the Enter key Enter your name with the numeric Keys Setting the Date and Time When 24-hour format is selected, do not perform this step 23DATE&TIME Format Press the key or key To select the display order Selections are as follows 1MMDDYYYY 2DDMMYYYY 3YYYYMMDD Daylight Saving Time Setting Follow these steps to enable Daylight Saving TimePress the key or key to select 1ON or 2OFF Selecting the Transmission Mode Memory transmission the Memory indicator is litDirect transmission the Memory indicator is off Transmission takes place as follows in each mode Selecting the Reception Mode Display Setting the Number of Rings for Auto Reception Press a numeric key to select Number of ringsSelect the number of rings you would like to use 0 to Setting the Number of Rings for Manual Reception Selecting the Reception Paper Size Setting the Tray Selection Press the key or key To select the tray selectionSelections are as follows 1AUTO 2TRAY 1 3TRAY Setting the Dial Mode Press the key or key To select the dial mode Setting the Number of Recall Times When the line is busyPress the numeric keys to select Number of recall attempts When a communication error occurs Setting the Recall Interval Press the numeric keys to select Recall intervalEnter the recall interval 01 to Enter the recall interval 00 to Press the Menu key to exit Setting the Index Function Use the following procedure to set the index function Setting Resolution Priority Press the key or key To select the transmission resolutionSelections are as follows 1STANDARD 2FINE Setting UP the Machine for USE with a PC Modem Using the Remote Reception Function Turning on Remote Reception Setting a Fax Remote Number Press a numeric key to enter the Fax Remote Number Distinctive Ringing Press the key or key To select a ringing patternSelections for ringing are Storing Numbers for Automatic Dialing Storing numbers Press the key or key to select a Chain Dial setting Enter the name of the destination with Numeric keysSelections are as follows 1NO 2MODE 1 3MODE 2 4MODE Return to to store another number Use the following procedure to clear numbers That you wish to deleteReturn to to clear another number Press the Menu key a number of times until you exit Storing Numbers Under Group Keys Enter the numbers that you wish to Store in the Group KeyPress the Enter key Enter a name for the Group Key with Numeric keys Return to to program another Group key Enter the numbers that you wish to Delete Deleting numbers from Group KeysTo delete a Group, press the appropriate Group key Using the Machine with AN Answering Machine Quiet Detect TimeEnter the Quiet Detect Time with Numeric keys Answering Machine Backup Until 6A.M. Mode appears, Then press the Enter keyIf Quiet Detect Time is not working properly Press the Menu key Press the key or Key Size and Weight When using the SPF/RSPFWhen using the document glass Originals Suitable for Faxing Unsuitable Originals Setting the Original Adjust the original guides to the width of your originalsSending Originals There are two ways to send the fax Mark Gently close the SPF/RSPFTo read each Press the # key Optional Transmission Settings Original SizePress the key or key To select the original size Selections are as follows 18.5x11 28.5x14 3A4 Resolution Contrast Cover Sheet Automatically prints Cover Message Function Press the Cover Sheet keyPress the key or key To select a message If you do not wish to add a message, select 1NO Message Press the 2-SIDED TX key until the desired setting appears Place the originals in the RSPF. p.52Follow these steps to fax a two-sided original Dialing and Transmitting Direct Keypad DialingRapid KEY Dialing Speed Dialing Normal Dialing Using the Speaker KEY Chain DialingDial the fax number of the receiving Machine Dialing with the numeric keys Dialing with a Rapid Key Using the Search KEY RedialingPress the SPEED/SEARCH key twice Canceling Deleting a Stored FAX JOB If the Memory Becomes Full While Scanning AN OriginalClear key Using Auto Mode Using MAN. ModeUsing A.M. Mode Receiving Faxes Optional Reception Settings TWO-SIDED Reception AR-168D only Receive Reduce When Using Manual Sending and Receiving Memory Substitute Reception into Memory Data Transfer Keys and press the Enter key 1YES Follow these steps to use the fax transfer function Adjust the resolution Transmission ReservationDialing and Transmitting p.59 Press the Start key to read each Press the # key Broadcasting Press the Broadcast keyPress the Start key . Transmission will begin To enter another fax number, return to step Broadcasting using a Group key Adjust the resolution and/or contrast settings if desiredPress the appropriate Group key. Transmission will begin You want to poll using one of the following methods PollingPolling Dial the number of the fax machine Serial Polling Follow these steps to use the serial polling function Setting up polling transmission Polling Transmission Memory Polling Adding a original to polling memory Deleting originals from polling memory Follow these steps to enable polling security Restricting Polling Machines Polling SecurityPress the Menu key Press the key or Key To select 1ON To turn off polling security, select 2OFF Programming/deleting passcode numbers Select 2CLEAR and press the Enter key Timer Operations Setting up a timer transmission jobTo cancel a timer operation, select 2CLEAR Press the key or key to select 1SET Canceling a Timer Transmission JOB Anti Junk FAX To store junk fax numbers, use the following procedure To clear junk fax numbers, use the following procedure Operation in COPY, PRINTER, SCANNER, and FAX Modes Printing OUT Reports You can print out a list of group dialing numbers Passcode List Fax numbers designated as Anti Junk Fax numbers Currently activated User Program settings Use the following procedure to print out reports Activity Report Auto Listing Press the key or key to select 1ON and press the Enter key Printing Transaction Reports Troubleshooting → Replace the TD cartridge Messages and Signals Audible SignalsDisplay Messages Specifications Index Reception mode Mode Auto mode MAN. mode ReportsStoring numbers Sending originals Manual sending Memo Memo Memo Canada REN of this equipment is indicated on the copying machine AR-FX9