Sharp AR-FX9 appendix Chain Dialing, Normal Dialing Using the Speaker KEY

HOW TO USE THE FAX FUNCTION

CHAIN DIALING

The Chain Dialing function allows you to combine a Rapid Key or Speed Dial number (See "STORING NUMBERS FOR AUTOMATIC DIALING" (p.42)) set for Chain Dialing with another Rapid Key, Speed Dial number, or number dialed with the numeric keys to dial one fax number up to 50 digits long. The following are some examples of how this can be done:

•Press Rapid Keys set for Chain Dialing in the correct order for the fax number that you wish to dial. For example, press Rapid Key 01 followed by Rapid Key 02. The final Rapid Key pressed for the fax number must not be set for Chain Dialing. Transmission will begin automatically when the final Rapid Key is pressed.

•Enter Speed Dial numbers set for Chain Dialing in the correct order for the fax number that you wish to dial. For example, press the [SPEED/SEARCH] key and [2] [2], followed by the [SPEED/SEARCH] key and [2] [7]. The final Speed Dial number entered for the fax number must not be set for Chain Dialing. Transmission will begin when the [START] key ( ) is pressed after the final Speed Dial number is entered.

•Enter the fax number that you wish to dial with the numeric keys. Press the [REDIAL/PAUSE] key to enter a pause

and then enter the next number. Transmission will begin when the [START] key ( ) is pressed after the final number is entered.

•	To use a Rapid Key or Speed Dial number for Chain Dialing, the Rapid Key or Speed Dial number must be set
Note	for Chain Dialing when it is stored (See "STORING NUMBERS FOR AUTOMATIC DIALING" (p.42)).

•When using Chain Dialing, the international communication setting of the final number entered is effective. International communication mode cannot be used if the final number is entered using a Rapid Key or Speed Dial number that does not have the setting enabled, or if the final number is entered with the numeric keys.

NORMAL DIALING USING THE [SPEAKER] KEY

When dialing normally with the [SPEAKER] key, press the [SPEAKER] key and dial using the numeric keys. You can hear the line and fax tones from the other machine through the speaker, allowing you to confirm the response of the other machine.

1Set the original in the SPF/RSPF and press the [SPEAKER] key. (See "SETTING THE ORIGINAL" (p.52))

	SPEED/ BROAD-	RECEPTION REDIAL/		To adjust the volume,
				press the left and [ ]
MEMORY SEARCH CAST		MODE	PAUSE
RESOLU-	COVER			key ( ) or [ ] key
TION	CONTRAST SHEET	REPORT 2-SIDED TX		( ).
	LINE STATUS		SPEAKER

	SPEED/	BROAD-	RECEPTION REDIAL/
MEMORY SEARCH		CAST	MODE	PAUSE
RESOLU-		COVER		2-SIDE
TION	CONTRAST SHEET		REPORT	TX
	LINE STATUS			SPEAKER

Dialing with a Speed Dial number and then press the [ENTER] key or [START] key ( ).

2Dial the fax number of the receiving

machine.

Dialing with the numeric keys

Dialing with a Rapid Key

01	02	03	04	05
10	11	12	13	14
06	07	08	09
15	16	17	18	SHIFT

3When you hear the fax reception tone of the other machine, press the [START] key ( ).

4Press the [] key ( ) or [] key ( ) to select "1:SEND", and then press the [ENTER] key or [START] key ( ).

60