Sharp AR-M200 Using the Rspf, Removing the document cover, Document feeder tray, Original face up

MAKING COPIES

Removing the document cover

To copy large originals like newspapers, remove the document cover. To remove the cover, lift straight up as shown. To replace the cover, do the reverse.

The RSPF cannot be removed.

Using the RSPF

• Originals that are A5 to A4 and 56 g/m2 to 90 g/m2 can be used. A
Note	maximum of 30 pages can be placed at once.
• Straighten curled originals before placing them in the document
		3
	feeder tray. Curled originals may cause misfeeds.
•	Place originals horizontally.
•	Before placing originals in the document feeder tray, be sure to
	remove any staples or paper clips from them.

• When a copy is made, the edges will not be copied (image loss). For the image loss, see the "SPECIFICATIONS" (p.89).

• When using the margin shift function, check the position of the margins carefully. (p.34)

1

2

Make sure that an original has not been left on the document glass.

Adjust the original guides to the size of the originals.

3	Set the original(s) face up in the	Original face up
	document feeder tray.
	The RSPF indicator on the operation panel
	will light up. If this indicator does not light up,
	the originals are not properly set or the RSPF
	is not properly closed.
4	Select the number of copies and other copy settings, and then
	press the [START] key ( ).

• The default output mode for copying from the RSPF is sort mode

Note (P.29), and a checkmark " " will automatically appear in the display (P.11). If "SORT AUTO SELECT" is disabled in the user programs, the default output mode will be non-sort mode. (P.57)

•To stop copying in the middle of a run, press the [CLEAR] key ().

•For the copy settings, see pages 23 through 35.

21