Sharp AR-M200 operation manual

In some areas, the "POWER" switch positions are marked "I" and

"" on the copier instead of "ON" and "OFF".

If your copier is so marked, please read "I" for "ON" and " " for "OFF".

Caution!

For a complete electrical disconnection, pull out the main plug. The socket-outlet shall be installed near the equipment and shall be easily accessible.

Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations.

Do not make copies of anything which is prohibited from copying by law. The following items are normally prohibited from copying by national law. Other items

may be prohibited by local law.
Money	Stamps	Bonds	Stocks	Bank drafts
Checks	Passports	Driver's licenses