Sharp AR-M200 operation manual Select Sharp Button Manager T Send to this application

INSTALLING THE SOFTWARE

6 Select "Sharp Button Manager T"

in "Send to this application".

Note	If other applications are shown, deselect the checkboxes for the other
	applications and leave only the Button Manager checkbox selected.

7

8

Click the "Apply" button.

Repeat Steps 5 through 7 to link Button Manager to "SC2:" through "SC6:".

Select "SC2:" from the "Scanner events" pull-down menu. Select "Sharp Button Manager T" in "Send to this application" and click the "Apply" button. Do the same for each ScanMenu through "SC6:".

When the settings have been completed, click the "OK" button to close the screen.

Button Manager is now linked to the scan menu (1 through 6).

The scan settings for each of scan menus 1 through 6 can be changed with the setting window of Button Manager.

For the factory default settings of the scan menu and the procedures for configuring Button Manager settings, see "Button Manager Settings" in the Online Manual.

48