Sharp AR-M200 operation manual Using the Scanner Mode, Scanning Using the Keys on the Machine

USING THE SCANNER MODE

The procedure for placing the original is the same as for copying. See "NORMAL COPYING" (p.20).

Scanner mode cannot be used at the following times:

Note • A misfeed has occurred (paper misfeed or original misfeed in the RSPF).

•The user programs are being used.

•The tray paper size is being set.

•The machine is being used in copy mode.

•The front cover or side cover is open.

SCANNING USING THE KEYS ON THE MACHINE

When scanning is performed by this method, the application that has been set in Button Manager will automatically start and the scanned image will be pasted into the application.

Note	If the machine is in copy mode, press the [MODE SELECT] key to
	switch to scanner mode and clear the previously set copy settings.
Scanning from the operation panel of the machine

1 Press the [MODE SELECT] key to select scanner mode.

The () indicator lights up to indicate that scanner mode is selected.

2	Place the original. (p.20)		6
3	Press the [ ] key ( ) or [ ] key ( ) to	SCAN USING:
	select the desired Button Manager scan	SC1:
	menu setting.		OK
		1,2,3,
		SP. FUNC	ZOOM
4	Press the [START] key ( ) to begin scanning.
	Scanner mode remains selected after scanning is finished. (To change

Note to a different mode, use the [MODE SELECT] key.)

51