Sharp AR-M200 operation manual Explanation Number, 50%, Low

USER SETTINGS

Program		Setting codes
	Program name	(factory default		Explanation
number		setting appears
		in bold)
		1: 30%	•	Use this to change the
		2: 40%
	MEM. FOR			proportion of machine
13		3: 50%
	PRINTER			memory used for printer
		4: 60%
				mode.
		5: 70%
			•	Use this setting to select
				whether or not holding down a
				key causes repeated input of
				the key. For keys that normally
14	AUTO KEY	1: ON		cause a set value to increase
				when held down (for example,
	REPEAT	2: OFF
				holding down the [		] key
				( ) or [	] key (	)), this
				program can be used to have
				the set value not change when
				the key is held down.
		1: NORMAL	•	Use this setting to select how
				long a key must be pressed
		2: 0.5 SEC.		for the input to be accepted.
15	KEY PRESS TIME	3: 1.0 SEC.		By selecting a longer time,
		4: 1.5 SEC.		you can prevent settings from
		5: 2.0 SEC.		being changed by the
				accidental pressing of a key.
	KEY TOUCH	1: LOW	•	This sets the volume of beep
16		2: HIGH
	SOUND			signals. (p.60)
		3: OFF
	SOUND AT	1: ON	•	Use this to sound a beep
17				when a base setting is
	DEFAULT	2: OFF
				selected. (p.60)
			• This mode reduces toner usage
18	TONER SAVE	1: ON		by about 10% when copying.
				Toner save mode is effective
	MODE	2: OFF
				when the exposure mode is
				AUTO (	) or TEXT (	).
			•	This is used to adjust the
		1: SPF/RSPF		exposure level.
			•	The automatic exposure level
		(Adjustment to
		5 levels is		can be adjusted separately for
				the document glass and the
		possible.)
	AE LEVEL			RSPF.
19		2:DOCUMENT
	ADJUST		•	For the procedure for
		GLASS
				adjusting the exposure and
		(Adjustment to
				guidelines for numeric values,
		5 levels is
				see page 24. The factory
		possible.)
				default setting for the
				exposure level is "centre".

56