Sharp AR-M200 operation manual Plug and play screen does not appear

TROUBLESHOOTING AND MAINTENANCE

Plug and play screen does not appear

If the Plug and Play screen does not appear after you connect the machine to your computer with a USB cable and turn on the machine, follow the steps below to verify that the USB port is available.

1 Click the "start" button, click "Control Panel", and then click "Performance and Maintenance".

•On Windows Vista, click the "Start" button, select "Control Panel", and then click "System and Maintenance".

•On Windows 98/Me/2000, click the "Start" button, select "Settings", and then click "Control Panel".

2 Click "System", click the "Hardware" tab, and click the "Device Manager" button.

"Universal Serial Bus controllers" will appear in the list of devices.

Note	• On Windows 98/Me, double-click the "System" icon and click the
	"Device Manager" tab.

•On Windows 2000, double-click the "System" icon, click the "Hardware" tab, and click the "Device Manager" button.

•On Windows Vista, click the "Device Manager", and if a message screen appears asking you for confirmation, click "Continue".

•If the "System" icon does not appear in Windows Me, click "view all Control Panel options".

3

4

Click the icon beside "Universal Serial Bus controllers".

Two items should appear: your controller chipset type and Root Hub. If these items appear, you can use the USB port. If the "Universal Serial Bus controllers" shows a yellow exclamation point or does not appear, you must check your computer manual for USB troubleshooting or contact your computer manufacturer.

Once you have verified that the USB port is enabled, install the software as explained in "INSTALLING THE SOFTWARE".

74