Sharp AR-M200 operation manual Toner Cartridge Replacement

TONER CARTRIDGE REPLACEMENT

When toner is low, the error indicator will light up and "TONER CARTRIDGE IS NEAR EMPTY." will appear in the display to alert you to purchase a new toner cartridge. on purchasing a new toner cartridge. If copying is continued while the indicator is lit, copies will gradually become lighter until the toner runs out. When the toner runs out, the machine will stop operating, the error indicator will blink, and "REPLACE THE TONER CARTRIDGE" will appear in the display. Follow the procedure below to replace the toner cartridge.

• After the machine stops, it may be possible to make a few more

Note copies by taking the toner cartridge out of the machine, shaking it horizontally, then reinstalling it. If copying is not possible after this operation, replace the toner cartridge.

•During a long copy run of a dark original, "TONER REPLENISHMENT IN PROGRESS" appears in the display, and the machine may stop even though toner is left. The machine will feed

toner up to 2 minutes and then the ready indicator will light up. Press

the [START] key ( ) to resume copying.

1 Open the bypass tray, and then open the side cover while pressing the side cover open button.

2 Push gently on both sides of the front cover to open the cover.

80