Sharp AR-M200 operation manual Misfeed Removal

MISFEED REMOVAL

When a misfeed occurs, the error indicator blinks, "CLEAR PAPER JAM" appears in the display, and the machine stops operating. If a misfeed occurs when using the RSPF, "RETURN X ORIGINAL(S) START TO RESUME" will appear in the display. ("X" indicates the number of pages to be returned.). This indicates the number of the originals that must be returned to the document feeder tray after a misfeed. Return the required number of originals. This number will be cleared when copying is resumed or the [CLEAR] key () is pressed. If an original misfeed occurs in the RSPF, the machine will stop and the error indicator will blink. To remove a misfeed from the RSPF, see "D: Misfeed in the RSPF" (p.79).

1 Open the bypass tray, and then open the side cover.

3 Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If the error indicator blinks, proceed to "A: Misfeed in the paper feed area" (p.77).

If the misfed paper is seen from this side, proceed to "C: Misfeed in the transport area". (p.78)

If paper is misfed here, proceed to "B: Misfeed in the fusing area". (p.77)

If paper is misfed here, proceed to "A: Misfeed in the paper feed area". (p.77)

76