Sharp AR-M200 Fusing system, Developer system, Light source, Resolution, Gradation, Power supply

Models: AR-M200

1 111
Download 111 pages 31.37 Kb
Page 92
Image 92

APPENDIX

Fusing system

Heat rollers

 

Developer system

Magnetic brush development

 

Light source

Tri-color CCD light source (CCD: 3 components; R, G, and B)

Resolution

Scan: 600 x 300 dpi Output: 600 x 600 dpi(AUTO/TEXT mode)

Scan: 600 x 600 dpi Output: 600 x 600 dpi(PHOTO mode)

 

Gradation

256 tones (8 bits)

 

Power supply

Local voltage ±10% (For this machine's power supply

requirement, see the name plate located on the back of the

 

machine.)

 

Power consumption

Max. 1.0 kW

 

Overall dimensions

 

 

(with bypass tray

802 mm (W) x 445 mm (D)

 

folded)

 

 

Weight*4

Approx. 19.9 kg

Approx. 20.6 kg

Dimensions

518 mm (W) x 445 mm (D) x 298 mm (H)

Operating

Temperature: 10°C to 30°C (50°F to 86°F)

conditions

Humidity: 20% to 85%

 

 

Sound Power Level LwA(1B=10dB)

 

Copying: 6.2 [B]

 

 

Standby: 3.2 [B]

 

 

Sound Pressure Level LpA (bystander positions)

Noise level

Copying: 48 [dB(A)]

 

Standby: 17 [dB(A)]

 

 

 

 

Sound Pressure Level LpA (operator position)

 

Copying: 52 [dB(A)]

 

 

Standby: 17 [dB(A)]

 

 

Noise emission measurement in accordance with ISO 7779.

Emission

Ozone: 1.5 mg/h or less

 

Dust: 4.0 mg/h or less

 

concentration

 

Styrene: 1.0 mg/h or less

 

(measured according

 

to RAL-UZ122 :

Benzene: 0.05mg/h or less

 

TVOC(Printing): 10mg/h or less

Edition Jun. 2006)

TVOC(Pre-Operating): 1mg/h or less

 

 

 

 

*1 When making multiple duplex copies, the copy speed will vary based on the environment conditions.

*2 The first-copy time is measured after the power save indicator turns off following power on, using the document glass with the polygon rotating in the copy ready state and "LSU SETTING" set to ON in the user programs (A4, paper fed from paper tray). The first-copy time may vary depending on machine operating conditions and ambient conditions such as temperature.

The time from power on until the first copy is output varies depending on the installation site and the state of the machine in use.

*3 The warm-up time may vary depending on machine operating conditions and ambient conditions such as temperature.

*4 Not including toner cartridges.

90

Page 92
Image 92
Sharp AR-M200 Fusing system, Developer system, Light source, Resolution, Gradation, Power supply, Power consumption