Sharp FO-3150 operation manual 102

Messages and Signals

HOLD	The HOLD key has been pressed to put the other
	party on hold during a phone conversation. Press the
	HOLD again to take the other party off hold.
LINE ERROR	Transmission or reception was not successful. Press
	the STOP key to clear the message and then try
	again. If the error persists, see Line error on page 96.
LINE IS IN USE	An extension phone connected to the fax is being
	used. Do not lift the fax's handset or attempt
	transmission at this time, as this will interrupt the
	conversation on the extension phone.
MEMORY IS FULL	If faxes have been received to memory because
	printing is not possible (an additional message will
	indicate the problem), resolve the problem so that
	printing can continue (see Substitute Reception to
	Memory on page 64).
	If you are attempting to transmit from memory, see If
	the memory becomes full on page 54.
	If you are copying, see If MEMORY IS FULL appears
	on page 66.
MEMORY PRINTING	The fax is preparing to or printing out a document
	from memory.
NO # STORED	This appears if you attempt to search for an auto-dial
	number when none have been stored.
OFF HOOK	This appears if you forgot to replace the handset after
	using it to dial and send a fax. Replace the handset or
	press the STOP key to clear the message.
ON HOOK DIAL	The SPEAKER key has been pressed and the fax
	machine is waiting for you to dial.
PAPER JAMMED	The printing paper is jammed. See page 105.
POLYGON ERROR	If this message appears, unplug the power cord and
	then plug it back in. If the message still appears, call
	for service.

102