Polling (Requesting a Fax Transmission)
78
1Dial the fax machine you want to poll using one of the following
methods:
Pick up the handset (or press ) and dial the full number. Wait for the
fax answerback tone.
Pick up the handset (or press ) and press a Rapid Key. Wait for the fax
answerback tone.
Press and enter a 2-digit Speed Dial number.
Enter the full number using the numeric keys.
2Press .
If you used the handset, replace it when POLLING appears in the display.
Reception will begin.
S
PEAKE
R
S
PEAKE
R
SPEED
DIAL
08/POLL

Requesting transmission

Being polled (Memory polling)

To let another fax machine poll your fax machine, you must first store the
document(s) in memory using the following procedure. Transmission will take
place when the other fax machine calls your fax machine and activates
polling. You can choose whether to allow polling only once, or an unlimited
number of times. In the latter case, your fax machine can be used as an
electronic "bulletin board".
If you allow polling only once, the document(s) will be automatically cleared
from memory after polling. If you allow polling an unlimited number of times,
the document will remain in memory until you clear it as explained in the
following section, Clearing a memory polling document.
all.book Page 78 Friday, October 31, 2003 4:10 PM