Loading Printing Paper

4 Insert the stack of paper firmly into the tray, print side up.

• Make sure that the stack is not higher than the marked line. Loading too much paper may cause paper jams and misfeeds.

• If paper remains in the tray, take it out and combine it into a single stack with the new paper before adding the new paper.

Important:

Be sure to load the paper so that printing takes place on the print side of the paper. Printing on the reverse side may result in poor print quality.

5 Make sure the stack of paper is aligned

against the right paper guide, and then gently move the left paper guide to the A4 position for A4 paper.

6 Push the paper release lever back down.

• Note: If the paper does not feed correctly, remove the entire stack from the tray and repeat the loading procedure from the beginning.

7 Replace the paper tray cover.

20

Page 22
Image 22
Sharp FO-3150 operation manual Loading Printing Paper