Sending a Fax by Automatic Dialling

Sending a fax by Direct Keypad Dialling

You can also enter a full number with the number keys and then press the

START key to begin dialling. You can use this method to dial a full number

when you don't need to speak to the other party before faxing.

1 Load the document(s).

 

RESOLUTION/

If desired, press

RECEPTION MODE

to set the

resolution and/or contrast.

READY TO SEND

2 Enter the number of the receiving machine by pressing the number keys.

If a pause is required between any of the digits to access a special service

FUNCTION

or an outside line, press . The pause will appear as a hyphen (two seconds per pause). Several pauses can be entered in a row.

3 Check the display. If the number of the receiving machine shown is

correct, press START .

STOP

If the number is not correct, press to backspace and clear one digit at a time, and then re-enter the correct digit(s).

44

Page 46
Image 46
Sharp FO-3150 operation manual Sending a fax by Direct Keypad Dialling