Sharp FO-3150 operation manual Quiet Detect Start Time, Enter a 2-digit number from 01 to

Optional A.M. Mode Settings

Quiet Detect Start Time

This setting can be used to delay the start of the Quiet Detect Time function. For example, if you want to insert a pause at the beginning of your answering machine’s outgoing message to ensure clear detection of fax signals, you can use this setting to delay the start of silence detection so that the pause will not cause the fax to take over the line.

Quiet Detect Start Timing has been set to five seconds at the factory. You can change this setting by entering a 2-digit number equal to the desired number of seconds of the delay, or turn the function off by enttering 00. As general guide, the delay time should be slightly longer than the pause before the outgoing message.

1		FUNCTION		Display:
	Press	once and	3 times.
					OPTION SETTING
2	Press	once and	7 times.
					QUIET START
3
	Press	once.
					ENTER (00-15) 05
4
	Enter a 2-digit number (from 01 to 15)				The display briefly shows
	for the number of seconds of the delay,				your selection, then:
	or enter 00 to turn off the function.				ON A.M. FAILURE
	Example: 3 seconds 0		3

STOP

5 Press to return to the date and time display.

Answering	Machine
5.

71