3. Receiving Faxes

Using TEL/FAX Mode

To select TEL/FAX mode, press

RESOLUTION/

RECEPTION MODE

(with no document in the

feeder) until the arrow in the display points to TEL/FAX.

RESOLUTION/

 

 

TEL FAX

RECEPTION MODE

 

 

 

 

 

 

 

TEL/FAX AM.

When the reception mode is set to TEL/FAX, your fax machine automatically answers all calls on two rings. After answering, your fax monitors the line for about five seconds to see if a fax tone is being sent.

If your fax machine detects a fax tone (this means that the call is an automatically dialled fax), it will automatically begin reception of the incoming document.

If your fax machine doesn't detect a fax tone (this means that the call is a voice call or manually dialled fax), it will make a ringing sound (called pseudo ringing) for 15 seconds to alert you to answer. If you don't answer within this time, your fax will send a fax tone to the other machine to allow the calling party to send a fax manually if they desire.

Note: Only the fax will alert you to voice calls or manually dialled faxes by pseudo ringing. An extension phone connected to the same line will not ring after the connection has been established.

Receiving

Faxes

3.

 

55

Page 57
Image 57
Sharp FO-3150 operation manual Receiving Faxes, Using TEL/FAX Mode