Sharp CD2200M Manual Operation, Express Defrost with Memory, Time Cooking, Single Stage Cooking

Express Defrost with Memory

*Suppose you want to cook with memory 0, which was programmed for 10 minutes Express Defrost sequence, Single Digit Input/Auto Start ON.

Procedure

1 Place food in oven.	0
Enter memory number.

Midway through the defrosting cycle, the CHECK indicator will light in the display and an audible signal will be heard unless signal volume has been set to Mute. You may open the door, turn food over and shield any warm portions. Close the door.

Procedure

2Press the START pad to continue

defrosting.START

NOTES:

1.Even though CHECK lights up in the display, your oven continues defrosting and does not stop to check.

2.Press the START pad at step 2 to continue defrosting as once the door is closed, cooking data will be canceled if subsequent keys are not pressed within 3 minutes.

3.See HELPFUL TIP for Express Defrost on page EN-11.

MANUAL OPERATION

Time Cooking

Your oven can be programmed for up to 4 cooking sequences and has 11 preset microwave power levels.

Maximum Cooking Time
Microwave 100%	- 60%	Maximum of 60 minutes
Microwave 50%	- 10%	Maximum of 120 minutes

(Please see Maximum Cooking Time on page EN-22)

Microwave Power Level

Press the SELECT	APPROXIMATE	Display
POWER PAD	PERCENTAGE OF
once then press	POWER
SELECT POWER	100%

990%

880%

770%

660%

550%

440%

330%

220%

110%

00%

Single Stage Cooking

*Suppose you want to cook for 2 minutes and 30 seconds at 50%.

	Procedure
1	Place food in oven and
				SELECT
	press the SELECT TIME
	pad. Enter cooking time.			TIME
	2	3	0
2	Press the SELECT POWER pad
	and enter power level.		SELECT		5
			POWER

Procedure

3 Press the START pad.

START

NOTES:

1.It is not necessary to press the SELECT POWER pad for 100% in Single Stage Cooking.

2.If cooking time input is over the maximum allowed time, error message EE9 will be displayed. Press the STOP/CLEAR pad to clear the error message and reduce cooking time or power level. For details, see Maximum Cooking Time on page EN-22.

Multi Stage Cooking

*Suppose you want to cook for 1 minute at 70% power for 1st stage and then continue to cook for 2 minutes at 50% power for 2nd stage and to cook for 3 minutes at 100% power for 3rd stage.

Procedure

1	Place food in oven and press			SELECT
	the SELECT TIME pad.
	Enter cooking time for 1st			TIME
	stage.
		1		0	0
2	Press the SELECT POWER pad.
	Enter power level for 1st stage.		SELECT		7
			POWER
3	Press the SELECT TIME pad.
				SELECT
	Enter cooking time for 2nd
	stage.			TIME
	2	0	0

EN-10