ProcedureDisplay
To check more than one counter
Press each pad as indicated below, after the previous usage is displayed.
0
1
2Enter memory number.
(After entering the memory number, the memory setting of each content is shown for
1.5 seconds at 0.3 second intervals until the STOP/ CLEAR pad is pressed.)
NO. CHECK
NO. CHECK
After about 1 sec.
CHECK
CHECK |
CHECK |
Total each | Input memory number. |
memory usage |
|
Total manual | Press the SELECT TIME |
cooking usage | pad. |
Total Express | Press the EXPRESS |
Defrost usage | DEFROST pad. |
*Suppose you want to know total usage and each memory usage. In this case the oven was used 8268 times and memory 1 in any Memory Input Method was used 513 times.
ProcedureDisplay
CHECK
CHECK |
CHECK |
STOP
CUSTOM | x 2 7 |
HELP |
1Press the CUSTOM HELP pad twice within
2seconds, then enter
7.Total usage will be displayed.
After about 1 sec.
CHECK
CLEAR
0
3Press the STOP/CLEAR pad to exit from the Custom Help Function.
NOTES:
1. If |
|
|
| is displayed at step 2 the memory has not |
CHECK
been programmed.
2. | Multiple memories can be checked until the STOP/ |
| CLEAR pad is pressed to exit from the Custom Help |
| Function. |
3. | The way to enter memory numbers depends on the |
1
2Enter memory number 1, to check the total memory usage of memory 1.
NO. CHECK
NO. CHECK
After about 1 sec.
CHECK
programmed Memory Input Method. |
4. When Express Defrost is set for 30 minutes in |
the memory, |
| and |
| are displayed |
repeatedly at | step 2. |
|
|
|
7. Counter Check/Clear
Confirm counters are set to "0" before using oven for the first time.
Counter Check
Counter check can be used to check the total number of times the oven has been used, or the number of times each
Total usage Press the CUSTOM HELP pad twice within 2 seconds, then enter 7. Total usage will be displayed.
NOTES:
1.To exit from Counter Check, press the STOP/CLEAR pad.
2.Each counter will count up to 9999, and then will automatically reset to 0 and begin counting again.
3.As shown in the above example, multiple counters can be checked before pressing the STOP/CLEAR pad to exit.
4.Only Dual Digit Input Method can be used when inputting memory numbers in Counter Check/Clear.