Sharp CD1800M, R-CD1200M, CD2200M Saving Memories, Setting time and power level for Single Stage

Procedure

5 Press the SELECT TIME pad and enter desired multiplication for A2 at Stage 2.

(Ex: Enter 1, 5 for 0.15.)

	Display
SELECT
TIME		DEF.
1
		DEF.

Saving Memories

*Memory 0 - 9 are programmed as factory settings. See the table of Programmed Memories on page EN-8.

*Memories must be programmed before memory cooking can be used.

	5
			DEF.
6 Press the SELECT TIME
		SELECT
pad and enter desired
time for B2 at Stage 2.		TIME		DEF.
(Ex: Press 2 for		2
20 seconds.)
				DEF.
7 Press the SELECT
		SELECT
POWER pad and enter
desired power level for		POWER	DEF.
PL2 at Stage 2.
(Ex: Enter 2 for 20%)		2
			DEF.
8 Press the SELECT TIME
		SELECT
pad and enter the pause
timing.		TIME	DEF.
(Ex: Enter 7 for when 70%
of total defrosting time		7
has passed.)			DEF.

Memory banks

Dual Digit: Memory 0-99

Single Digit: Memory 0-9

Repeat Digit Input: Memory 0-29

Max. cooking stages: 4 stages

Setting time and power level for Single Stage

<Single Digit Input>

*Suppose you want to set 1 minute at 70% with memory 2.

ProcedureDisplay

SET	X 2
MEMORY

NO.

1Press the SET MEMORY pad twice within 2 seconds.

9 Press the SELECT	SELECT
POWER pad and enter
desired power level for	POWER	DEF.
PL3 at Stage 3.
(Ex: Enter 1 for 10%)	1
		DEF.

2

2 Enter memory number.

SELECT

TIME

NO.

START

10 Press the START pad.

STOP

CLEAR

11 Press the STOP/CLEAR pad to exit from the Custom Help Function.

NOTES:

1.See the table for Microwave Power Level on page EN-10 and The Pause Timing on page EN-17.

2.You can enter minus numbers for B1 and B2 at steps 3 and 6.

In that case,

press the SELECT TIME pad twice at step 3 or 6

( is displayed.) and enter desired time for or

B1 and B2 at Stage 1 and 2.

Press the SELECT TIME pad again to enter positive

numbers. ( is displayed.)

3 Press the SELECT TIME pad.

1 0 0

4 Enter cooking time.

SELECT

POWER

5 Press the SELECT POWER pad.

7

6 Enter power level.

SET

MEMORY

NO.

7Press the SET MEMORY pad to save memory.

STOP

CLEAR

8 Press the STOP/CLEAR pad to exit.

EN-18