The details of the register system modification are as shown below:
Items | A=1 | A=2 | A=3 |
(EURO status 1) | (EURO status 2) | (EURO status 3) | |
General Z1 report | Issue | Issue | Issue |
General Z2 report | Issue | Issue | Issue |
GT memories | - | Clear | Clear*1 |
(GT1, GT2 and GT3) |
|
|
|
Conversion of preset prices of Dept./ | - | Yes | Yes*1 |
PLU |
|
|
|
Exchange amount printing for total and | Yes | Yes | No |
change |
|
|
|
Exchange calculation method | Division | Multiplication | Multiplication |
Domestic currency symbol | - | [EURO] | [EURO] |
Domestic currency decimal point | - | 2 | 2 |
position |
|
|
|
Exchange currency symbol | [EURO] | Previous domestic | |
|
| currency symbol |
|
Exchange currency decimal point | 2 | Previous domestic currency - | |
position |
| decimal point position |
|
Smallest coin (for rounding system) | - | Normal | Normal*1 |
Rounding up/down of the unit digits of | - | 00 | 00*1 |
amount |
|
|
|
Limit of the least significant digit in | - | Arbitrary | Arbitrary*1 |
entering amount of item |
|
|
|
Limit of the least significant digit in | - | Arbitrary | Arbitrary*1 |
entering amount of payment |
|
|
|
Memory of difference due to rounding | - | No | No*1 |
Rounding of foreign currency for V | Round off | Round off | Round off |
| (4 down/5 up) |
|
|
• The item marked with
*1: When you perform from EURO status 2, previous data remains unchanged.
*2: When you perform from EURO status 1 or 2, “space” is set.
IMPORTANT
•Conversion of the preset unit prices of departments and PLUs
Note that the conversion rate of the preset rate of the Vkey is applied for the conversion, and the method is set to “division”. When the conversion is performed, the message “PRICE CONVERTED” will be printed on the #800 report.
•After the execution of the procedure with “A=1”, treat EURO as foreign currency using the exchange key (V) with the preset rate entry. Set the EURO conversion rate as the currency exchange rate for the exchange key.
•After the execution of the procedure with “A=2”, treat EURO as domestic currency, and national currency as foreign currency using the exchange key (V) with the preset rate entry. Set the EURO conversion rate as the currency exchange rate for the exchange key.
NOTE You can manually make these settings. For programming details, please refer to programming section.
72
