Sharp XE-A147, XE-A137 instruction manual Automatic VAT 1 and tax 2 through, Example Key operation

Manual tax 1 through 4 system (Manual entry method using programmed percentages)

st

This system provides the tax calculation for taxable 1, taxable 2, taxable 3, and taxable 4 subtotals. This calculation is performed using the corresponding programmed percentages when the tkey is pressed just after the skey. After this calculation, you must finalize the transaction.

Automatic VAT 1 and tax 2 through 4

This system enables the calculation in the combination with automatic VAT 1 and tax 2 through 4. This combination can be any of VAT 1 and tax 2 through 4. The tax amount is calculated automatically with the percentages previously programmed for these taxes.

NOTE • The tax status of PLU/subdepartment depends on the tax status of the department which the PLU/ subdepartment belongs to.

•VAT/tax assignment symbol can be printed at the fixed right position near the amount on the receipt as follows:

VAT1/tax1 A

VAT2/tax2 B

VAT3/tax3 C

VAT4/tax4 D

When the multiple VAT/tax is assigned to a department or a PLU, a symbol of the lowest number assigned to VAT/tax rate will be printed. For programming, please refer to “Various Function Selection Programming 1” (Job code 66) on page 56.

Example

Key operation

(When the manual	$
VAT 1 through 4	s
system is selected)	t
	A

Print

38