EURO MIGRATION FUNCTION
NOTE EURO programming described in this section are for users in the countries which will join to the members of the European Currency Union, not for the users in the countries already have joined the Union.
Your register can be modified to correspond with each period set for the introduction of EURO, and in your register each currency is treated as shown on the table below depending on which period you are in. Basically your register can be automatically modified to correspond to the introduction of EURO by executing automatic EURO modification operation shown below in the Z/PGM mode. However, there are several options you must set depending on your needs. So, please carefully conduct necessary settings.
How currencies are treated in your register
|
| Period 1 | Period 2 | Period 3 |
|
| After the introduction of | After EURO banknotes | After the national currency |
|
| EURO, and before EURO | and coins begin to | is withdrawn from |
|
| banknotes and coins begin | circulate, and before | circulation |
|
| to circulate | national currency is |
|
|
|
| withdrawn from circulation. |
|
|
|
|
| |
|
|
| and national currency) |
|
Currency | EURO | Exchange key | Domestic currency | Domestic currency |
Foreign currency | Domestic currency | Exchange key | Exchange key | |
| National currency |
| ||
|
|
|
|
|
Automatic EURO modification operation
Make sure the mode switch is in the Z/PGM mode first, then perform the following procedure. Please note that you can perform each operation only once with the substitution of “A=1”, “A=2” and “A=3”. For example if you performed the operation with the substitution of “A=2” first, you cannot perform the operation with the substitution of “A=1”.
800 
@
*A 
A
* A=1: Applicable for period 1
* A=2: Applicable for period 2
* A=3: Applicable for period 3
71
