FULL SALES REPORT (X or Z REPORT)
•Use the reading function (X) when you need to take a reading of sales information entered since the last reset. You can take this reading any number of times. It does not affect the register’s memory.
•Use the resetting function (Z) when you need to clear the register’s memory. Resetting prints all sales information and clears the entire memory except for the GT1 through GT3, reset count, and consecutive number.
X1 and Z1 reports: Daily sales reports
X2 and Z2 reports: Periodic (monthly) consolidation reports
When you take an X1 or X2 report, turn the mode switch to the X/Flash position, and use the corresponding key sequence.
When you take an Z1 or Z2 report, turn the mode switch to the Z/PGM position, and use the corresponding key sequence.
■■ Daily full sales report (X1 or Z1 report)
Put the mode key in the mode switch and turn it to the X/Flash or the Z/PGM position.
Key operation
A(For Z1 report: in the Z/PGM position)
Sample report
*2
Mode title*1
Reset counter
Net grand total
Grand total of minus registration
Dept. code
Sales q’ty
Sales amount
“+” dept. counter and total
Subtotal percent counter and total
Net sales total
Taxable 1 total
VAT 1 total
Tax total
Net total without tax
Item percent counter and total Item void counter and total
Subtotal void counter and total
Paid total
Paid total average per customer
Starting cash memory (+) Starting cash memory
Received on account counter and total
Paid out counter and total
(To be continued on the next page)
*1: When you take X1 report, “X1” is printed.
*2: Printed in the Z1 report only.
27
