Part Names and Functions (Continued)
Numbers in 
refer to the main pages in this operation manual where the topic is explained.
Remote Control
Remote control signal 11 transmitters
STANDBY button 26
For putting the projector into the standby mode.
ENTER button 34
For setting items selected or adjusted on the menu.
RETURN button 34
For undoing an operation.
AUTO SYNC button 41
For automatically adjusting images when connected to a computer.
RESIZE button 30
For switching the screen size
(SIDE BAR, SMART STRETCH, etc.).
RGB/COMP. button 44
For switching to the respective input signal type.
IRIS button 29
For switching “HIGH
BRIGHTNESS MODE”, “MEDIUM MODE” and “HIGH CONTRAST MODE”.
INPUT button 27
For displaying the Input list.
WIRED R/C JACK
For controlling the projector by connecting the remote control to the projector.
25 ON button
For turning the power on.
34 MENU button
For displaying adjustment and setting screens.
34 Adjustment buttons ( , , , )
For selecting menu items.
27 Input Mode Select buttons
For switching to the respective input modes.
29 PICTURE MODE button
For selecting the appropriate picture to best match the projected image.
29 CONTRAST button
For displaying the contrast adjustment screen.
29 FREEZE button
For freezing images.
29 BRIGHT button
For displaying the brightness adjustment screen.
LIGHT button
For lighting all buttons on the remote control.
Connecting the Remote Control to the Projector
When the remote control cannot be used due to the range or positioning of the projector, connect a ø3.5 mm minijack cable (commercially available) from the WIRED R/C JACK on the top of the remote control to the WIRED REMOTE control input terminal on the rear of the projector.
To WIRED REMOTE control input terminal
To WIRED R/C JACK
ø3.5 mm minijack cable
(commercially available)
Remote control
-10