Turning the Projector On/Off (Continued)

Turning the Power Off

(Putting the Projector into Standby

Mode)

1Press STANDBY on the pro- jector or STANDBY on the remote control, then press that button again while the confirma- tion message is displayed, to put the projector into standby mode.

2Unplug the power cord from the AC outlet after the cooling fan stops.

•The power indicator on the projector blinks in blue while cooling.

•The power indicator changes to red when the projector finishes cooling.

On-screen display

Info

•Do not unplug the power cord during projection or cooling fan operation. This can cause damage due to the rise in internal temperature, as the cooling fan also stops.

•When connected to equipment such as an amplifier, be sure to turn off the power to the equipment connected first and then to the projector.

-26