Part Names and Functions
Numbers in 
refer to the main pages in this operation manual where the topic is explained.
Projector
MENU button 34
For displaying adjustment and setting screens.
Adjustment buttons 34
(, , , ) For selecting menu items.
ENTER button 34
For setting items selected or adjusted on the menu.
RETURN button 34
For undoing an operation.
Lens shift dial 28
For moving the projected image vertically.
Zoom knob 27
Focus ring 27
Adjustment foot 28
Lens cap 
Pressing the two tabs, you can remove/attach the lens cap.
Using the Terminal Cover
When the projector is used on a desktop, high mounted or ceiling mounted, attach the terminal cover (supplied) to hide the connecting cables.
Attaching the Terminal Cover
Align the hook on the terminal cover with the insert hole in the hook at the back of the projector.
Press the hook in the direction indicated with the arrow to fasten the terminal cover to the projector.
Insert the terminal cover into the mounting groove on the projector while pushing the tabs inside the terminal cover to the outside with your fingers.
30RESIZE button
For switching the screen size (SIDE BAR, SMART STRETCH, etc.).
27INPUT button
For displaying the Input list.
26STANDBY button
For putting the projector into the standby mode.
25 ON button
For turning the power on.
46Temperature warning indicator
When the internal temperature rises, this indicator will illuminate red.
25, 46 Lamp indicator
Illuminates blue, indicating normal function. Replace the lamp when the indicator illuminates red.
25, 46 Power indicator
Illuminates red, when the projector is in standby. When the power is turned on, this indicator will illuminate blue.
47 Intake vent 
28 Adjustment foot
11Remote control sensor
PUSH!
3
3
1
2
1
Remove the rubber cap attached on the projector and attach the hooks.
-8