Setting Up the Projector
Setting Up the Projector
For optimal image quality, position the projector perpendicular to the screen with the projector’s feet flat and level.
Note
•The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.
•For optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.
•A polarizing screen cannot be used with this projector.
Standard Setup (Front Projection)
■Place the projector at the required distance from the screen according to the desired picture size.
Example of standard setup
Image
Lens shifted to lowest position
90°
Lens center
H1
Lens shifted to highest position
H2 90°
Lens center
L
L : Projection distance
H1: Distance from the lens center to the bottom of the image (when the lens is shifted to the lowest position)
H2: Distance from the lens center to the bottom of the image (when the lens is shifted to the highest position)
Note
•For details, refer to “Picture (Screen) Size and Projection Distance” on page 16.
-14