3.Adjusting the Projector Angle Using the Adjustment Feet
The inclination of the projector can be adjusted using the adjustment feet when the projector is placed on an uneven surface or when the screen is slanted.
1Lift the projector to adjust its height while pressing the foot releases.
2Remove your hands from the foot releases after the height has been adjusted.
•The angle of projection is adjustable up to 5 degrees from the surface on which the projector is placed.
3Rotate the adjustment feet to make fine adjustment.
•Rotate the adjustment feet to gradually raise or lower the projector. Ensure that the projector is stable and does not wobble.
Note
•When the height of the projector is adjusted, the image may become distorted, depending on the relative positions of the projector and the screen.
Info
•Do not apply too much pressure on the projec- tor when the adjustment feet are stuck out.
•When lowering the projector, be careful not to get your fingers caught in the area between the adjustment foot and the projector.
•Hold the projector firmly while lifting or carrying.
•Do not hold by the lens area.
4.Adjusting the Vertical Position of the Image
You can move the projected image vertically by turning the lens shift dial.
Info
•Do not turn the lens shift dial beyond the upper limit and lower limit positions. This may cause the projector to malfunction.
Foot releases
Adjustment feet
Lens shift dial
Up
Down
-28