Using the “Options” Menu

When HDMI is selected for the input mode.

The illustration shown here is for explanation and may be different from the actual on-screen display.

*1

*2

*3

*1 If the input mode is S-VIDEO or VIDEO input, the display changes to the “Video System” screen.

*2 Displayed when the input mode is HDMI input.

*3 Displayed when the input mode is HDMI input or DVI input with digital signals.

Adjusting the Image Position

You can move the projected image vertically.

button button

Note

•The Image Shift function only works when “RESIZE” is set to “SMART STRETCH”, “CINEMA ZOOM”, “ZOOM 14:9” or “SMART ZOOM”.

•You can initialize the “Image Shift”, “Subtitle” and “Overscan” settings to their respective

default setting by selecting “Yes” in “Reset” and

pressing ENTER.

Menu operation ⇒ Page 34

Adjusting the Vertical Size of the Display (Subtitle Setting)

With this function, you can adjust the vertical size of the display to allow for subtitles.

button

The image is compressed by adjusting the

vertical size of the display.

 

button

The image is enlarged by adjusting the

vertical size of the display.

 

Note

•When changing the screen with the Subtitle set- ting, not only the bottom of the screen rises, but also the upper part is changed to a certain point.

•The Subtitle setting can be adjusted more effectively with the “Overscan” and “Image Shift” functions.

•The Subtitle setting only works when “RESIZE” is set to “SMART STRETCH”, “CINEMA ZOOM”, “ZOOM 14:9” or “SMART ZOOM”.

•The adjustment area changes according to the input signal.

•You can initialize the “Image Shift”, “Subtitle” and “Overscan” settings to their respective default

setting by selecting “Yes” in “Reset” and pressing

ENTER.

Adjusting the Overscan

This function allows you to adjust the Overscan area (display area).

button

Enlarges the image.

(The display area becomes smaller.)

 

button

Reduces the image.

(The display area becomes larger.)

 

Note

•You can adjust the Overscan area for the following input signals and the RESIZE function.

-Input signal: VIDEO, 480I/480P, 540P, 576I/576P, 720P, 1035I or 1080I/1080P

-RESIZE function: “SIDE BAR”, “CINEMA ZOOM”, “STRETCH” or “ZOOM 14:9”

•If the display area ratio is set too large, noise may appear at the screen edges. If this happens, set the display area ratio to a smaller value.

•Also read “About Copyrights” on page 31.

•You can initialize the “Image Shift”, “Subtitle” and “Overscan” settings to their respective

default setting by selecting “Yes” in “Reset” and

pressing ENTER.

-42