
Image Projection
Switching the Input
Mode
Select the appropriate input mode for the connected equipment.
Press Input Mode Select buttons or INPUT on the remote control to select the input mode.
•When INPUT on the remote control or
INPUT on the projector is pressed, the Input list appears. While the Input list is displayed, follow the procedure below to switch the Input mode.
Press | INPUT or / to select the desired |
input mode. | |
Press | ENTER. |
•If ENTER is not pressed, the projector switches to the selected input mode in a few seconds.
Note
•When no signal is received, “NO SIGNAL” will be displayed. When a signal that the projector is not preset to receive is received, “NOT REG.” will be displayed.
Adjusting the Projected Image
1. Adjusting the Focus
You can adjust the focus with the focus ring on the projector.
Rotate the focus ring to adjust the focus while watching the projected image.
2. Adjusting the Image Size
You can adjust the image size using the zoom knob on the projector.
Move the zoom knob to enlarge or shrink the image size.
Adjustment buttons
( / )
ENTER
Input Mode Select buttons
INPUT
Input mode menu
Focus ring
in
Zoom
out
Zoom
Zoom knob
Operation Basic
-27