Regarding the Lamp (Continued)
5Insert the new lamp unit.
•Press the lamp unit firmly into the lamp unit compartment. Fasten the securing screws.
6Attach the lamp unit cover.
•Close the lamp unit cover in the direc- tion of the arrow. Then tighten the user service screws.
Info
•If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector.
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
Info
•Make sure to reset the lamp timer only when replacing the lamp. If you reset the lamp timer and continue to use the same lamp, this may cause the lamp to become damaged or explode.
1Connect the power cord.
•Plug the power cord into the AC socket of the projector.
2Reset the lamp timer.
• While holding down ENTER, and
on the projector, press ON on the projector.
•“LAMP 0000H” is displayed, indicating that the lamp timer is reset.
Securing screws
2
1
User service screws
Adjustment button | Adjustment button |
ENTER button | ON button |
AC socket