Sharp XV-Z20000 Signal Type Setting, Adjusting the Color Space, Adjusting the Economy Mode, Adjusting the Dynamic Range, Selecting the Background Image

Using the “Options” Menu (Continued)Signal Type Setting

When using an input mode other than S-VIDEO or VIDEO input, set the signal type setting to the corresponding input signal type (RBG or Component).

■When COMPONENT is selected for the input mode

Selectable items	Description
Auto	Automatically selects the appropri-
	ate input signal between RGB and
	Component.
RGB	Set when RGB signals are received.
Component	Set when component signals are
	received.

■When DVI is selected for the input mode

Selectable items	Description
D. PC RGB	Set when digital PC RGB signals are
	received from the computer.
D. PC COMP.	Set when digital PC component signals
	are received from the computer.
D. VIDEO RGB	Set when digital video RGB signals are
	received from video equipment.
D. VIDEO COMP.	Set when digital video component
	signals are received from video equip-
	ment.
A. RGB	Set when analog RGB signals are
	received.
A. COMP.	Set when analog component signals
	are received.

■When HDMI is selected for the input mode

This function sets the type of picture signal input from HDMI-compatible equipment.

Selectable items	Description
Auto	Ordinarily, the Auto setting should be
	used.
RGB	Displays images in RGB (Red/Green/
	Blue) mode.
YCbCr4:4:4	These modes display images using a
YCbCr4:2:2	luminance signal (Y) to indicate contrast
	and color difference signals (CbCr) to
	show the colors. (Select whichever
	mode gives the best image.)

Note

•You can also select “Signal Type” using RGB/COMP. on the remote control.

Menu operation ⇒ Page 34

Adjusting the Color Space

This function sets the color space for signals input from an HDMI-compatible device.

Selectable items	Description
Auto	In most circumstances, “Auto” should
	be selected.
ITU601	Select the item that results in the best
	picture quality.
ITU709

Adjusting the Dynamic Range

An optimum picture may not be displayed if an HDMI- capable device’s output signal type and the projector’s input signal type do not match. If this should occur, switch “Dynamic Range”.

Selectable items	Description
Auto	In most circumstances, “Auto” should
	be selected.
Standard	When the black levels of the image show
	banding or appear faded, select the item
Enhanced
	that results in the best picture quality.

Selecting the Background Image

Selectable items	Description
Logo	SHARP logo screen
Blue	Blue screen
None	— (Black screen)

Adjusting the Economy Mode

Setting the Economy mode:

Select “Economy Mode” and press .

Press / to select the desired item and press

ENTER.

■RS-232C Port

When the RS-232C port is set to “ON”, the RS-232C function operates and consumes power even when the projector is in Standby mode. Accordingly, the RS-232C port should be set to “OFF” when it is not being used so as to minimize the amount of power consumed when the projector is in Standby mode.

Selectable items	Description
ON	The RS-232C is operating at all times
	(to accept communications).
OFF	RS-232C does not operate when the
	power supply is in standby.

Note

•When you control the projector by means of RS- 232C, select “ON”.

-44