■Auto Power Off
This function automatically switches the projector to Standby mode if no signals are received for a set period.
Selectable items | Description |
ON | When no input signal is detected for |
| more than 15 minutes, the projector will |
| automatically enter standby mode. |
OFF | The Auto Power Off function will be |
| disabled. |
Note
•When the Auto Power Off function is set to “ON”, 5 minutes before the projector enters standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.
•When the Auto Power Off function is set to “OFF”, “LED” is set to “On” automatically. Be sure to set the Auto Power Off function to “ON” to use the LED Off function. (See page 43.)
Selecting the Transmission
Speed (RS-232C)
Make sure that both the projector and computer are set for the same baud rate.
Selectable items | Description | |
9600bps | Transmission speed is slow. | |
38400bps |
|
|
|
| |
|
|
|
115200bps | Transmission speed is rapid. | |
Fan Mode Setting
This function changes the fan rotation speed.
Selectable items | Description |
Normal | Suitable for normal environments. |
High | Select this when using the projector at |
| altitudes of approximately 4,900 feet |
| (1,500 meters) or more. |
•When “Fan Mode” is set to “High”, the fan rotation speeds up, and the fan noise becomes louder.
Menu operation ⇒ Page 34
Reversing/Inverting Projected
Images
This function allows the projector to be used in a wider range of projection styles by allowing the image to be inverted to suit the projection environment (location).
Selectable items | Description |
Front | Normal image (Projected from the front |
| of the screen) |
Ceiling + Front | Inverted image (Projected from the |
| front of the screen with an inverted |
| projector) |
Rear | Reversed image (Projected from the |
| rear of the screen or with a mirror) |
Ceiling + Rear | Reversed and inverted image (Pro- |
| jected with a mirror) |
•See page 15 for details of Projection (PRJ) Mode.
Returning to the Default Settings
Use “All Reset” to initialize all the adjustments you have made to the default settings.
Note
The following items cannot be initialized.
•“Fine Sync” menu
—Special Modes
•“Options” menu
—Lamp Timer (Life)
—Language
Other Function
Selecting the On-screen
Display Language | Useful | ||
| |||
The projector can switch the |
| ||
among 11 languages. | Feature | ||
|
|
| |
English | Français |
| |
|
| ||
Deutsch | Italiano |
|
|
Español | Svenska |
|
|
Nederlands | Português |
|
|
|
|
|
|
-45