Shindaiwa AHS2510/EVC manual Product Description, 6SHFLÀFDWLRQV

Product Description

Spark Plug

Ignition Throttle interlock

Fuel Tank

Air Filter

Assembly

Fuel

Tank

Hedge Trimmer Cutter

Assembly

Cutter
Assembly
Adjustment	Cutter
Lever	Blade
	Cover
Handle
	Outer

Throttle Trigger

Guard

Tube

Powerhead Assembly

Using the illustration as a guide, familiarize yourself with the Shindaiwa AHS2510 articulated hedge trimmer and its various components. Understanding your machine helps ensure top performance, longer service life, and safer operation.

Latch Lock		Hedge Trimmer
		Cutter Assembly
Latch	Gearcase	Cutter Bar and
Release		Cutter Blades

	WARNING!
Fuel	Do not alter this machine
Tank
Guard	or any of its components!

6SHFLÀFDWLRQV

Model	AHS2510
Engine Type	4-cycle, vertical cylinder, air cooled
Engine Bore x Stroke	34 x 27 mm/1.34 x 1.06 in.
Engine Displacement	24.5cc/1.5 cu. in.
Unit Weight, Less Fuel	6.2 kg/13.6 lbs.
Unit Dimensions (LxWxH)	1670 x 197 x 250 mm / 65,8 x 7,8 x 9,9 in.
Max. Power	7,500 min-1(rpm)
Recommended idle speed	3,000 (±300) min-1
Fuel Tank Capacity	590 ml/20 oz..
Fuel/oil ratio	50:1 with *ISO-L-EGD or JASO FC class 2-cycle Mixing Oil
Carburetor	Walbro WYL, Diaphragm type
Ignition	Fully electronic, program controlled
Spark Plug	NGK CMR5H
Electrode Gap	0.6 - 0.7 mm/ .024 -.028 in.
Torque	100-150 kg cm / 9.8 - 14.7 N∙m
Air Cleaner	Foam pre-filter; main filter: dry element
Starting Method	Recoil type
Stopping Method	Slide switch, grounding type
Blade Length	590 mm / 20.3 in
Clutch Type	Automatic, centrifugal clutch with bevel gear
Gear Type	Spur gears
Gear Lubrication	Lithium-based grease
Standard Equipment	Tool kit w/ spark plug wrench, 4mm hex wrench, 8 x 10 mm spanner, front handle w/guard, tool set, blade scabbard.
EPA Emission Compliance Period*	Category A

Specifications are subject to change without notice.

*The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operat- ing hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended).

** The NGK CMR5H also meets the requirements for electro magnetic compliance (EMC).

5