Assembly (continued)

Adjusting cutter assembly for storage or transportation

1.With the engine off, install the scab- bard onto the blade.

2.Release the latch lock and the latch release. Make sure the cutter blades, latch lock, and the latch release return securely to the straight ahead position.

3.Make sure the scabbard is in place on the blade before storing or transporting.

WARNING!

Never run the engine when adjusting the cutter assembly to the storage position.

Transport / storage position

0DNHVXUHWKHVFDEEDUGLVLQSODFHEHIRUH

VWRULQJRUWUDQVSRUWLQJ

Throttle lever free play

The throttle lever free play should be approximately 4 - 6 mm. Make sure that the throttle lever operates smoothly with- out binding. If it becomes necessary to adjust the lever free play, follow the pro- cedures and illustrations that follow.

1.Loosen the air cleaner cover knob(s) and remove the air cleaner cover.

2.Loosen the lock nut on the cable adjuster. Turn the cable adjuster in or out as required to obtain proper free play 4 - 6 mm.

3.Tighten the locknut.

4.Reinstall the air cleaner cover.

Cable

Adjuster

Lock Nut

5RWDWHFDEOHDGMXVWHULQRURXWWRREWDLQSURSHUIUHHSOD\

4 - 6 mm

7KURWWOHOHYHUIUHHSOD\

8

Page 8
Image 8
Shindaiwa AHS2510/EVC manual Adjusting cutter assembly for storage or transportation, Throttle lever free play