Mixing fuel
CAUTION!
Never use any type of gasoline con- taining more than 10% alcohol by vol- ume! Some types of gasoline contain alcohol as an oxygenate. Oxygenated gasoline may cause increased operat- ing temperatures. Under certain con- ditions,
Generic oils and some outboard oils should never be used in your Shindaiwa engine.
CAUTION!
This engine is designed to operate on a 50:1 mixture consisting of unleaded gasoline and
ŶUse only fresh, clean unleaded gasoline with a pump octane of 87 or higher.
ŶMix all fuel with a
CAUTION!
Mix and pour fuel outdoors where WKHUHDUHQRVSDUNVDQGÀDPHV
Examples of 50:1 mixing quantities
U.S. | METRIC | ||
Gasoline | Gasoline | ||
mixing oil | mixing oil | ||
US Gallons | Fl.oz. | Liter | cc. |
1 | 2.6 | 4 | 80 |
2 | 5.2 | 8 | 160 |
5 | 13 | 20 | 400 |
10 | 25.6 | 30 | 600 |
20 | 51.2 | 50 | 1000 |
50 | 128 | 100 | 2000 |
IMPORTANT!
Mix only enough fuel for your immediate needs! If fuel must be stored longer than 30
days and oil with fuel stabilizer is not used, it should first be treated with a fuel stabilizer such as
Oil is a registered JASO FD classi- fied oil and also meets or exceeds
Filling the fuel tank
WARNING!
Minimize the Risk of Fire
ŶNEVERVPRNHRUOLJKW¿UHVQHDUWKH engine.
ŶALWAYS stop the engine and allow it to cool before refueling.
ŶALWAYS Wipe all spilled fuel and move at least 3 meters (10 feet) from the fueling point and source before starting.
ŶNEVERSODFHÀDPPDEOHPDWHULDO FORVHWRWKHHQJLQHPXIÀHU
ŶNEVER operate the engine without the
PXIÀHUDQGVSDUNDUUHVWHUVFUHHQLQ place and in good working condition.
ŶFUEL IS HIGHLY FLAMMABLE.
ŶALWAYS store gasoline in a con-
WDLQHUDSSURYHGIRUÀDPPDEOHOLTXLGV
ŶALWAYS inspect the unit for fuel leaks before each use. During each
UH¿OOFKHFNWKDWQRIXHOOHDNVIURP around the fuel cap and/or fuel tank. If fuel leaks are evident, stop using the unit immediately. Fuel leaks must be repaired before using the unit.
ŶALWAYS move the unit at least 3 meters (10 feet) away from a fuel
VWRUDJHDUHDRURWKHUUHDGLO\ÀDP- mable materials before starting the engine.
1.Place the unit on a flat, level surface.
2.Clear any dirt or other debris from around the fuel filler cap.
CAUTION!
Slowly remove the fuel cap only after stopping the engine
3.Remove the fuel cap, and fill the tank with clean, fresh fuel.
4.Reinstall the fuel filler cap and tighten firmly.
5.Wipe away any spilled fuel before start- ing engine.
9