Shindaiwa AHS2510/EVC manual Checking Unit Condition, Safe Operation, Before trimming

Operation

Checking Unit Condition

NEVER operate the unit with the protec-	ALWAYS make sure the cutting attach-	NEVER allow the engine to run at high
tive devices removed!	ment fits properly into the appropriate	speeds without a load. Doing so could
Use only authorized Shindaiwa parts and	attachment holder. If a properly installed	damage the engine.
	attachment vibrates, replace the attach-	NEVER operate a unit with worn or dam-
accessories with your Shindaiwa hedge
	ment with new one and re-check.
trimmer. Do not make modifications to		aged fasteners or attachment holders.
	ALWAYS stop the engine immediately
this unit without written approval from		When transporting, make sure the engine
Shindaiwa, Inc.	and check for damage if you strike a for-
		is not running and the blade is covered
ALWAYS make sure the cutting attach-	eign object or if the unit becomes tangled.
		with the blade cover.
	Do not operate with broken or damaged
ment is properly installed and firmly tight-
	equipment.
ened before operation.
NEVER use a cracked or warped cutting
attachment: replace it with a serviceable one.

Safe Operation

This machine is designed especially for	Before trimming:	Ŷ Start the engine.
trimming hedges.	Ŷ Wear suitable protective clothing and	Ŷ Put on the strap, if so equipped.
Never use this machine for any other pur-	equipment. See the section “Safety:	Ŷ Rest when you feel fatigued.
poses. Never try to cut stones, metals, plas-	The Properly Equipped Operator” for	Ŷ Never stand directly underneath the
	information.
tics or any other hard objects. Using this
	Ŷ Choose the best working position	branch you are cutting. Be aware of
Articulated Hedgetrimmer for other pur-
		falling branches. Note that a branch
poses than trimming hedges may damage	for safety against the falling objects	may spring back at you after it hits the
the machine or cause serious injury.	(branches, etc.).	ground.

Working Position

ŶHold the shaft grip above the power- head with your right hand, and the loop handle with your left hand.

ŶYour left arm should be extended to the most comfortable position.

NOTE:
Rest when you feel fatigued.	Hold the loop
	handle with your
	left hand
	Right hand on
	shaft grip

2SHUDWRULQZRUNLQJSRVLWLRQ

12