Siemens 6ED1050-1AA00-0BE8 manual 1RUPDO 6ODYH  3DVVZRUG, 1RUPDO  6ODYH !3DVVZRUG

Programming LOGO!

3.8 Configuring additional functions for LOGO! (0BA7 only)

Changing LOGO! from slave mode to normal mode

LOGO! is now in the following view:

!1RUPDO

6ODYH  3DVVZRUG



1.Move the cursor to "①": Press or

2.Confirm "①": Press OK

&KDQJHPRGH !1R

<HV



3.Move the cursor to "②": Press or

4.Confirm "②": Press OK

You have now successfully changed the LOGO! from slave mode to normal mode. LOGO! restarts automatically and then displays the main menu.

Assigning a password from the LOGO!

1.Repeat steps 1 to 5 as described earlier in the topic "Changing LOGO! from normal mode to slave mode". LOGO! shows the following display:

1RUPDO  6ODYH !3DVVZRUG



2.Move the cursor to "①": Press or

3.Confirm "①": Press OK

2OG

1R3DVVZRUG 1HZ

4.Enter a password. The procedure is the same as for entering a password for the circuit program. (see the topic Password for circuit program protection (Page 91)).

LOGO!
Manual, 04/2011, A5E03556174-01	125