Siemens 6ED1050-1AA00-0BE8 manual Technical data LOGO! AM2 AQ, Analog outputs

Technical data

A.13 Technical data: LOGO! AM2 AQ

	LOGO! AM2 RTD
Cable length (shielded)	max. 10 m
Interference frequency	55 Hz
suppression

A.13	Technical data: LOGO! AM2 AQ
			LOGO! AM2 AQ
		Power supply
		Input voltage	24 V DC
		Permissible range	20.4 ... 28.8 V DC
		Power consumption	35 ...90 mA
		Voltage failure buffering	typ. 5 ms
		Power loss at 24 V	0.9 ... 2.2 W
		Electrical isolation	No
		Reverse polarity protection	Yes
		Ground terminal	for connecting ground and shielding of the analog
			output line.
		Analog outputs
		Number	2
		Voltage range	0 ... 10 V DC
		Voltage load	≥5 kΩ
		Current output	0/4...20mA
		Curreny load	≤250 Ω
		Resolution	10 bit, normalized to 0 ... 1000
		Cycle time for analog output	depending on installation (50 ms)
		Electrical isolation	No
		Line length (shielded and twisted)	max. 10 m
		Error limit	Voltage output: ± 2.5 % FS
		Short circuit protection	Voltage output: Yes (affect neighboring voltage output)
		Overload protection	Voltage output: Yes (affect neighboring voltage output)

Note

The 0/4 ... 20 mA current output is only possible when the module is used with a LOGO! 0BA6 or LOGO! 0BA7 Base Module.

LOGO!
Manual, 04/2011, A5E03556174-01	341