Siemens 6ED1050-1AA00-0BE8 manual Logic Assignments, LOGO! system, Inputs Output data bits

LOGO! installation and wiring

2.3 Wiring LOGO!

Logic Assignments

LOGO! system	AS Interface system
Inputs	Output data bits
In	DQ1
In+1	DQ2
In+2	DQ3
In+3	DQ4
Outputs	Input data bits
Qn	DI1
Qn+1	DI2
Qn+2	DI3
Qn+3	DI4

"n" depends on the plug-in position of the expansion module relative to the LOGO! Base Module. It indicates the number of the input or output in LOGO! program code.

Note

Ensure that there is enough space for the inputs/outputs of the AS interface in the LOGO!'s address space. If you are already using more than 12 physical outputs or more than 20 physical inputs, it is no longer possible to operate the CM AS interface!

For detailed information about the networking of LOGO! on the AS interface bus please refer to the LOGO! CM AS Interface documentation, in particular the Micro Automation Sets 7 and 16.

LOGO!

60 Manual, 04/2011, A5E03556174-01