LOGO! functions

4.3 Special Functions

Accuracy of T

Because of slight tolerances in the characteristics of electronic components, the set time T can deviate. You can find a detailed description of such deviations in the "On-delay" topic (Page 160).

Accuracy of the timer (weekly/yearly timer)

To prevent timing inaccuracy of the real-time clock in C versions caused by this deviation, the timer value is continuously compared with a high-precision timebase and corrected. The resultant maximum timing inaccuracy is ±2 s/day.

4.3.3Backup of the real-time clock

Because the internal real–time clock of a LOGO! is backed up, it continues operation after a power failure. The ambient temperature influences the backup time. At an ambient temperature of 25°C, the typical backup time of a LOGO! 0BA6 is 80 hours and the typical backup time of a LOGO! 0BA7 is 20 days.

If there is a power outage of a LOGO! for more than 80 hours (if 0BA6) or 20 days (if 0BA7), the internal clock responds, dependent on the equipment series, as shown below:

●Equipment series 0BA0:

On restarting, the clock is set to "Sunday 00:00 1 January". The time starts to run. Due to this, the system processes the time switches, which trigger actions if necessary.

●Equipment series 0BA1 to 0BA6:

On restarting, the clock is set to "Sunday 00:00 1 January". The time is stopped and flashes. LOGO! is back in the status that it was in before the power outage. In RUN mode, the system processes the counters that were parameterized with the time above. The clock is, however, still stopped.

●Equipment series 0BA6:

If you are using the optional LOGO! Battery card, or combined LOGO! Memory/Battery card, LOGO! can retain the clock time for up to two years. These cards are available for equipment series 0BA6.

●Equipment series 0BA7

On restarting, the clock is set to "Sa 00 00 2011-01-01". The time is stopped and flashes. LOGO! is back in the status that it was in before the power outage. In RUN mode, the system processes the counters that were parameterized with the time above. The clock is, however, still stopped.

 

LOGO!

152

Manual, 04/2011, A5E03556174-01

Page 151 Page 153
Page 152
Image 152
Siemens 6ED1050-1AA00-0BE8 manual Backup of the real-time clock, Accuracy of T, Accuracy of the timer weekly/yearly timer
Page 151 Page 153

6ED1050-1AA00-0BE8 specifications

The Siemens 6ED1050-1AA00-0BE8 is a versatile and essential component in industrial automation and control systems. Designed for a wide range of applications, this device is part of Siemens' extensive portfolio of automation products, renowned for their reliability and innovative technologies.

One of the key features of the Siemens 6ED1050-1AA00-0BE8 is its ability to serve as a communication processor. This device efficiently manages communication between different components within a control system, aiding seamless data transfer across various protocols. The processor supports both standard and advanced communication protocols, which makes it highly adaptable to various environments.

In terms of technology, the 6ED1050-1AA00-0BE8 utilizes advanced bus systems for effective and efficient data exchange. The integration of these bus systems enhances the capacity for real-time data processing, allowing for quick responses to changes in the operational environment. The device also boasts exceptional performance metrics, ensuring not only speed but also accuracy in communication.

The characteristics of this device are noteworthy. It comes equipped with a user-friendly interface, which facilitates straightforward configuration and programming. This feature is particularly beneficial for technicians and engineers, as it minimizes the time required to set up and start using the processor. Additionally, it is designed to work seamlessly with various Siemens automation systems, ensuring compatibility and scalability.

Another significant aspect of the Siemens 6ED1050-1AA00-0BE8 is its robust design. Built to endure the harsh conditions often found in industrial environments, the device features high-quality materials that enhance its durability and longevity. This resilience ensures that it can withstand vibrations, temperature fluctuations, and other potential challenges present in industrial settings.

Furthermore, the device supports flexible installation options, allowing it to be easily integrated into existing systems without extensive modifications. This flexibility is crucial for modern facilities looking to upgrade or expand their automation capabilities without overhauling their entire infrastructure.

In conclusion, the Siemens 6ED1050-1AA00-0BE8 represents a synthesis of reliability, advanced technology, and user-friendly features tailored for industrial automation. Its high adaptability, robust design, and versatile application make it an invaluable tool for optimizing operations and enhancing communication within industrial control systems, cementing its position as a leader in automation solutions.
Top Page Image Contents