CM AS Interface, communication states

LOGO! installation and wiring

2.4 Putting into operation

The CM AS Interface has three communication states: The LED is lit green, red or flashes red/yellow.

LED AS-I is lit

Green	Red	Red/Yellow
AS Interface communication OK	AS Interface communication	Slave has address "0".
	failed

CM AS Interface, behavior on communication failure

●If the AS Interface voltage fails, communication between the LOGO! system and the expansion modules, which are arranged to the right of the LOGO! CM AS Interface expansion module, is interrupted.

Recommendation: Position LOGO! CM AS Interface on the far right side.

●If communication is interrupted, the switching outputs are reset after about 40 to 100 ms.

CM EIB/KNX, communication states

The CM EIB/KNX has three communication states: The LED is lit green, red or orange.

LED BUS is lit

Green	Red	Orange
Bus connection OK,	Bus connection interrupted	Programming mode active and
communication OK,		bus connection OK
no programming mode

CM EIB/KNX, behavior on communication failure

●LOGO! voltage failure

If there is a power failure of LOGO! or a disruption in the communication to the LOGO! master or to the communication partner on the left side, the outputs are set to 0. The RUN/STOP LED lights up red after a second.

●LOGO! voltage recovery

LOGO! starts up again, CM EIB/KNX sends the parameterized states.

●CM EIB/KNX voltage failure

All the inputs of the LOGO! master on the EIB are set to 0 by the LOGO! master.

●CM EIB/KNX voltage recovery

All the outputs of the LOGO! master on the EIB are updated. The inputs are read by the EIB depending on the parameterization.

●Short circuit on the bus or bus interruption

The behavior can be parameterized in the LOGO! configuration window of the application program in ETS (EIB Tool Software). The red light is set after 5 seconds.

●Bus recovery

The behavior can be parameterized in the LOGO! configuration window.

	LOGO!
68	Manual, 04/2011, A5E03556174-01

6ED1050-1AA00-0BE8 specifications

The Siemens 6ED1050-1AA00-0BE8 is a versatile and essential component in industrial automation and control systems. Designed for a wide range of applications, this device is part of Siemens' extensive portfolio of automation products, renowned for their reliability and innovative technologies.

One of the key features of the Siemens 6ED1050-1AA00-0BE8 is its ability to serve as a communication processor. This device efficiently manages communication between different components within a control system, aiding seamless data transfer across various protocols. The processor supports both standard and advanced communication protocols, which makes it highly adaptable to various environments.

In terms of technology, the 6ED1050-1AA00-0BE8 utilizes advanced bus systems for effective and efficient data exchange. The integration of these bus systems enhances the capacity for real-time data processing, allowing for quick responses to changes in the operational environment. The device also boasts exceptional performance metrics, ensuring not only speed but also accuracy in communication.

The characteristics of this device are noteworthy. It comes equipped with a user-friendly interface, which facilitates straightforward configuration and programming. This feature is particularly beneficial for technicians and engineers, as it minimizes the time required to set up and start using the processor. Additionally, it is designed to work seamlessly with various Siemens automation systems, ensuring compatibility and scalability.

Another significant aspect of the Siemens 6ED1050-1AA00-0BE8 is its robust design. Built to endure the harsh conditions often found in industrial environments, the device features high-quality materials that enhance its durability and longevity. This resilience ensures that it can withstand vibrations, temperature fluctuations, and other potential challenges present in industrial settings.

Furthermore, the device supports flexible installation options, allowing it to be easily integrated into existing systems without extensive modifications. This flexibility is crucial for modern facilities looking to upgrade or expand their automation capabilities without overhauling their entire infrastructure.

In conclusion, the Siemens 6ED1050-1AA00-0BE8 represents a synthesis of reliability, advanced technology, and user-friendly features tailored for industrial automation. Its high adaptability, robust design, and versatile application make it an invaluable tool for optimizing operations and enhancing communication within industrial control systems, cementing its position as a leader in automation solutions.

Siemens 6ED1050-1AA00-0BE8 manual CM AS Interface, communication states

Models: 6ED1050-1AA00-0BE8